Polaris 2010 Breeze Owner'S Manual Download Page 12

Page: 12 / 87

SAFETY

Operator Safety

Seat Belts

Riding in this vehicle without wearing a seat belt increases the risk of serious

injury in the event of an accident or sudden stop. Riders

must

wear seat belts at

all times. Seat belts reduce the severity of injury in the event of a sudden stop or

accident. Always make sure the seat belts are secured for both the operator and

passenger before riding.

Poor Visibility

Operating the vehicle in darkness or inclement weather could result in a collision

or accident, especially if operating on a road or street. This vehicle is not

equipped with highway-approved lights. Use caution and drive at reduced

speeds in conditions of reduced visibility such as fog, rain and darkness. Clean

headlights frequently and replace burned out headlamps promptly.

Accessories

Non-approved accessories may seriously affect vehicle stability. Using accesso-

ries not approved by Polaris for use on this vehicle could cause loss of control or

an accident. Never operate with accessories not approved by Polaris for use on

this vehicle.

Summary of Contents for 2010 Breeze
























































































Search results

Summary of Contents for 2010 Breeze

Reviews:

Related manuals for 2010 Breeze

Brands by name

Popular brands

Polaris 2010 Breeze, Owner'S Manual

Search results

Summary of Contents for 2010 Breeze

Reviews:

Related manuals for 2010 Breeze

Brands by name

Popular brands