Polaris 2010 Breeze Owner'S Manual Download Page 2

Page: 2 / 87

Pantone 426 C

For your nearest Polaris dealer,
call 1-800-POLARIS
or visit www.polarisindustries.com
Polaris Sales Inc.,
2100 Hwy. 55, Medina, MN 55340
Phone 1-888-704-5290
Part No. 9922699 Rev 01
Printed in USA

Improper vehicle use can result in SEVERE INJURY or DEATH.

Do not start vehicle until all occupants are seated.

Remain seated, holding handles, while the vehicle is in motion.

Operate from driver’s side only.

Always wear your seatbelt to prevent ejection from vehicle.

The roof is not designed or intended to provide rollover

protection. Vehicle rollover could cause severe injury or death.

Always operate with caution.

Never operate after or while using Alcohol or Drugs.

Never operate on slopes steeper than 15 degrees

15°.

Drive slowly straight up and down slopes.

Keep entire body in the vehicle at all times.

Reduce speed and use extra caution when carrying passengers.

Avoid sharp turns or turns during heavy acceleration.

Operate slowly in reverse and avoid sharp turns or sudden braking.

Make sure passengers read and follow all safety labels.

This vehicle is restricted to a maximum of 4 occupants.

When towing the vehicle, the Master ON-OFF Switch MUST be

in the OFF position or severe motor damage will occur.

Place the Master ON-OFF Switch in the OFF position if storing

the vehicle for more than 5 days. Failure to do so may lead to

complete battery discharge and battery damage.

Batteries require regular maintenance. Failure to maintain

batteries in accordance with the owner’s manual can result in

battery damage, vehicle malfunction, fire, and/or severe

injury or death.

Summary of Contents for 2010 Breeze
























































































Search results

Summary of Contents for 2010 Breeze

Reviews:

Related manuals for 2010 Breeze

Brands by name

Popular brands

Polaris 2010 Breeze, Owner'S Manual

Search results

Summary of Contents for 2010 Breeze

Reviews:

Related manuals for 2010 Breeze

Brands by name

Popular brands