Polaris 2010 Breeze Owner'S Manual Download Page 43

Page: 43 / 87

OPERATION

New Operator Driving Procedures

Stopping

1. Release the accelerator pedal completely.
2. Depress the brake pedal and brake to a complete stop.

Parking

1. Stop the vehicle on a level surface.
2. Engage the park brake.

Tip:

A roll-away alert will sound if the vehicle begins to roll away after being

parked. Return to the vehicle immediately and make sure the park brake is

engaged.

3. If the vehicle will be parked for more than a few minutes, turn the

key off. Remove the key and move the direction selector switch to

the neutral position.

4. Any time the vehicle will be parked for more than a few hours,

move the Master On/Off switch to the OFF position and follow the

recommended storage procedures. See page 55.

Summary of Contents for 2010 Breeze
























































































Search results

Summary of Contents for 2010 Breeze

Reviews:

Related manuals for 2010 Breeze

Brands by name

Popular brands

Polaris 2010 Breeze, Owner'S Manual

Search results

Summary of Contents for 2010 Breeze

Reviews:

Related manuals for 2010 Breeze

Brands by name

Popular brands