Polaris 2010 Breeze Owner'S Manual Download Page 16

Page: 16 / 87

SAFETY

Operator Safety

Operating on Slippery Terrain

Operating on excessively rough, slippery or loose terrain could cause loss of

traction, loss of control, accident or overturn.
Do not operate on excessively rough, slippery or loose terrain. Always use extra

caution on rough, slippery or loose terrain.

Operating Improperly in Reverse

Improperly operating in reverse could result in a collision with an obstacle or

person. Always follow proper operating procedures as outlined in this manual.

See page 47.
Before backing, always check for obstacles or people behind the vehicle. When

it's safe to proceed, back slowly.

Improper Tire Maintenance

Operating this vehicle with improper tires or with improper or uneven tire

pressure could cause loss of control, accident or overturn.
Always use the size and type of tires specified for your vehicle. Always maintain

proper tire pressure as described in the owner's manual and on safety labels.

Summary of Contents for 2010 Breeze
























































































Search results

Summary of Contents for 2010 Breeze

Reviews:

Related manuals for 2010 Breeze

Brands by name

Popular brands

Polaris 2010 Breeze, Owner'S Manual

Search results

Summary of Contents for 2010 Breeze

Reviews:

Related manuals for 2010 Breeze

Brands by name

Popular brands