Polaris 2010 Breeze Owner'S Manual Download Page 10

Page: 10 / 87

SAFETY

Operator Safety

Failure to operate this vehicle properly can result in a collision, loss of control,

accident or overturn, which may result in serious injury or death. Heed all safety

warnings outlined in this section of the owner’s manual. See the OPERATION

section of the owner’s manual for proper operating procedures.

Operating Without Instruction

Operating this vehicle without proper instruction

increases the risk of an accident. The operator

must understand how to operate the vehicle

properly in different situations and on different

types of terrain. Complete the New Operator

Driving Procedures outlined on pages 40-41.
All operators must read and understand the

owner's manual and all warning and instruction

labels before operating the vehicle. Never allow a

guest to operate this vehicle until the guest has

completed the New Operator Driving Procedures

outlined on pages 40-41.

Age Restrictions

This vehicle is an ADULT VEHICLE ONLY.
NEVER operate this vehicle if you are under

age 16 and NEVER operate this vehicle

without a valid driver’s license. Never operate

with a passenger under the age of 5.

WARNING

Summary of Contents for 2010 Breeze
























































































Search results

Summary of Contents for 2010 Breeze

Reviews:

Related manuals for 2010 Breeze

Brands by name

Popular brands

Polaris 2010 Breeze, Owner'S Manual

Search results

Summary of Contents for 2010 Breeze

Reviews:

Related manuals for 2010 Breeze

Brands by name

Popular brands