Polaris 2007 Predator 50 Owner'S Manual Download

Page: 58 / 199

Driver Warnings

WARNING

POTENTIAL HAZARD

Climbing hills improperly.

WHAT CAN HAPPEN

Improper hill climbing could cause loss of control or overturn.

HOW TO AVOID THE HAZARD

Always follow proper procedures for climbing hills as

described in the Owner's Manual beginning on page 98.
Always check the terrain carefully before you start up any hill.

Never climb hills with excessively slippery or loose surfaces.

Shift your weight forward.
Never open the throttle suddenly. The ATV could flip over backwards. Never go over the top of any

hill at high speed. An obstacle, a sharp drop, or another vehicle or person could be on the other side

of the hill.

Summary of Contents for 2007 Predator 50








































































































































































































Search results

Summary of Contents for 2007 Predator 50

Reviews:

Related manuals for 2007 Predator 50

Brands by name

Popular brands

Polaris 2007 Predator 50, Owner'S Manual

Search results

Summary of Contents for 2007 Predator 50

Reviews:

Related manuals for 2007 Predator 50

Brands by name

Popular brands