Polaris 2007 Predator 50 Owner'S Manual Download

Page: 106 / 199

103

Driving Safely

Turning Around on a Hill

4. Staying uphill of the ATV, turn the handle-

bars full left.

5. While holding the brake, release the park-

ing brake lock and slowly release the brake,

allowing the ATV to roll around to your

right until it's pointing across the hill or

slightly downward.

6. Lock the parking brake and remount the

ATV from the uphill side, keeping body

weight uphill.

7. Restart the engine.
8. Squeeze the rear brake lever.
9. Release the parking brake and drive slowly,

controlling speed with the rear brake, until

the ATV is on more level ground.

8 ft. (2.4 m)

Summary of Contents for 2007 Predator 50








































































































































































































Search results

Summary of Contents for 2007 Predator 50

Reviews:

Related manuals for 2007 Predator 50

Brands by name

Popular brands

Polaris 2007 Predator 50, Owner'S Manual

Search results

Summary of Contents for 2007 Predator 50

Reviews:

Related manuals for 2007 Predator 50

Brands by name

Popular brands