Polaris 2007 Predator 50 Owner'S Manual Download

Page: 171 / 199

168

Maintenance

Storage

Stabilize the Fuel

Polaris Carbon Clean is a fuel stabilizer and fuel system dryer. It cleans the fuel system, the

combustion chamber and the exhaust ports. It also prevents bacterial growth and promotes

better starting after the storage period.
1. Fill the fuel tank.
2. Add Polaris Carbon Clean Fuel Treatment or Polaris Fuel Stabilizer. Follow the instruc-

tions on the container for the recommended amount.

NOTE:

Carbon clean will also reduce the possibility of bacterial growth in the fuel system.

3. Start the engine and allow it to run for 15-20 minutes so the stabilizer can disperse

through the fuel in the tank and carburetor.

4. Stop the engine.
5. Turn the fuel valve off.
6. Drain the carburetor bowl.

Summary of Contents for 2007 Predator 50








































































































































































































Search results

Summary of Contents for 2007 Predator 50

Reviews:

Related manuals for 2007 Predator 50

Brands by name

Popular brands

Polaris 2007 Predator 50, Owner'S Manual

Search results

Summary of Contents for 2007 Predator 50

Reviews:

Related manuals for 2007 Predator 50

Brands by name

Popular brands