manualshive.com logo in svg

Polaris 2007 Predator 50, Owner'S Manual

Share
Download
Polaris 2007 Predator 50 Owner'S Manual Download Page 112

109

Emission Control Systems

Exhaust Emission Control System

The emissions from the exhaust of this vehicle are controlled by engine design, including 

factory-set fuel delivery and ignition. The engine and related components must be main-

tained at Polaris specifications to achieve optimal performance.
Engine idle speed is the only adjustment Polaris recommends that the operator perform. Any 

other adjustments should be performed by an authorized Polaris dealer.
The emissions label is located on the clutch cover or engine case near the clutch box.

NOTE:

The installation of devices that effectively increase exhaust emissions beyond their legal lim-

its will void all manufacturer warranties and may violate laws governing the registration and 

operation of this vehicle.

Electromagnetic Interference

This spark ignition system complies with Canadian ICES-002.
This vehicle complies with European directives 97/24/EC and 89/336/EEC.

Summary of Contents for 2007 Predator 50








































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands