Polaris 2007 Predator 50 Owner'S Manual Download

Page: 95 / 199

Driving Safely

Riding Gear

Eye Protection

Do not depend on eyeglasses or sunglasses for eye protection. Whenever riding a Polaris

vehicle, always wear shatterproof goggles or use a shatterproof helmet face shield. Polaris

recommends wearing approved Personal Protective Equipment (PPE) bearing markings such

as VESC 8, V-8, Z87.1, or CE. Make sure protective eye wear is kept clean.

Gloves

Off-road style gloves with knuckle pads are the best for comfort and protection.

Boots

The best footwear is a pair of strong over-the-calf boots with low heels.

Clothing

Always wear long sleeves and long pants to protect arms and legs. Riding pants with knee-

pads and a jersey with shoulder pads provide the best protection.

Summary of Contents for 2007 Predator 50








































































































































































































Search results

Summary of Contents for 2007 Predator 50

Reviews:

Related manuals for 2007 Predator 50

Brands by name

Popular brands

Polaris 2007 Predator 50, Owner'S Manual

Search results

Summary of Contents for 2007 Predator 50

Reviews:

Related manuals for 2007 Predator 50

Brands by name

Popular brands