manualshive.com logo in svg

Polaris 2007 Predator 50, Owner'S Manual

Share
Download
Polaris 2007 Predator 50 Owner'S Manual Download Page 86

83

Break-in Period

1. Fill the fuel tank with gasoline. See page 74.
2. Check the oil level. Add the recommended oil as needed to maintain the oil level in the 

proper range. See page 121.

3. Drive slowly at first. Select an open area that allows room to familiarize yourself with 

vehicle operation and handling.

4. Vary throttle positions. Do not operate at sustained idle. 
5. Perform regular checks on fluid levels, controls and areas outlined on the daily pre-ride 

inspection checklist. See page 84.

6. Perform the following maintenance at the end of the break-in period.

Item

Remarks

See

Page

Engine oil change

Perform break-in oil change

122

Oil pre-filter screen

Clean filter with oil change

123

Transmission oil

Perform break-in oil change

126

Valve clearance

See your dealer for inspection and adjustment

--

Summary of Contents for 2007 Predator 50








































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands