Polaris 2002 Snowmobile Owner'S Manual Download Page 104

Page: 104 / 181

102

MAINTENANCE

Lubrication

The suspension pivot shafts should be lubricated with Polaris Premium

All Season Grease (PN 2871066) at 500 miles (800 km) initially, every

1000 miles (1600 km) after that, and before off-season storage each

year. Lack of lubrication affects your ride and the life of your

suspension.
For detailed information about suspension lubrication and adjustments,

see your Polaris dealer.

NOTE:

The following illustrations are general representations. Your

model may differ. Lubrication points are indicated by a

, and for-

ward is to the left.

NOTE:

Models will M-10 suspension will be shipped with a supple-

ment that contains information specific only to that suspension.

Forward

Summary of Contents for 2002 Snowmobile






















































































































































































Search results

Summary of Contents for 2002 Snowmobile

Reviews:

Related manuals for 2002 Snowmobile

Brands by name

Popular brands

Polaris 2002 Snowmobile, Owner'S Manual

Search results

Summary of Contents for 2002 Snowmobile

Reviews:

Related manuals for 2002 Snowmobile

Brands by name

Popular brands