Polaris 2002 Snowmobile Owner'S Manual Download Page 14

Page: 14 / 181

SAFETY

Operator Safety

The following two pages identify signal words and symbols that appear

in this manual. Your safety is involved when these words and symbols

are used. Become familiar with their meanings before reading the

manual.

The safety alert symbol, on your snowmobile or in this manual,

alerts you to the potential for personal injury.

Indicates a potential hazard that could result in serious injury or

death.

Indicates a potential hazard that may result in minor personal

injury or damage to the machine.

WARNING

CAUTION

NOTE

“NOTE:” will alert you to important information or instructions.

Indicates a situation that may result in damage to the machine.

IMPORTANT

“IMPORTANT:” will alert you to important information or instructions.

CAUTION

Summary of Contents for 2002 Snowmobile






















































































































































































Search results

Summary of Contents for 2002 Snowmobile

Reviews:

Related manuals for 2002 Snowmobile

Brands by name

Popular brands

Polaris 2002 Snowmobile, Owner'S Manual

Search results

Summary of Contents for 2002 Snowmobile

Reviews:

Related manuals for 2002 Snowmobile

Brands by name

Popular brands