Polaris 2002 Snowmobile Owner'S Manual Download Page 32

Page: 32 / 181

SAFETY

Safety Decals And Locations

Passenger Warning - 5

Some snowmobiles are

designed for the operator

only, while others are

designed for the operator and

one passenger. A warning

decal on either the console or

the hood of your machine

indicates whether it’s

designed for the operator only

(1-Up) or the operator and a

passenger (2-Up). For more

information on operating capacities, see page 24.

Decal text found on 1-Up Models:

This vehicle is designed for operator only. “NO PASSENGER”

Decal text found on 2-Up Models:

This vehicle is designed for operator and “ONE” passenger only.

Summary of Contents for 2002 Snowmobile






















































































































































































Search results

Summary of Contents for 2002 Snowmobile

Reviews:

Related manuals for 2002 Snowmobile

Brands by name

Popular brands

Polaris 2002 Snowmobile, Owner'S Manual

Search results

Summary of Contents for 2002 Snowmobile

Reviews:

Related manuals for 2002 Snowmobile

Brands by name

Popular brands