Polaris 2002 Snowmobile Owner'S Manual Download Page 140

Page: 140 / 181

138

MAINTENANCE

General Maintenance

Tool Kit

A tool kit is included with your

machine for emergency and

routine maintenance. Included in

the kit are:
A. Emergency Start Strap
B. Phillips Screwdriver
C. Tubular Socket
D. Tubular Socket Handle
E. Wrench
F. Shielded screwdriver (only

models with Indy Select or AFX

shocks)

Always keep the tool kit with the snowmobile.

If necessary, a replacement tool kit may be purchased from your Polaris

dealer.

Tool Pouch Clip

Some Polaris snowmobiles are equipped

with a tool pouch clip (G) located inside

the flap on the back of the seat. Use this

clip to secure the tools and keep them

from bouncing around during

snowmobile use.

Summary of Contents for 2002 Snowmobile






















































































































































































Search results

Summary of Contents for 2002 Snowmobile

Reviews:

Related manuals for 2002 Snowmobile

Brands by name

Popular brands

Polaris 2002 Snowmobile, Owner'S Manual

Search results

Summary of Contents for 2002 Snowmobile

Reviews:

Related manuals for 2002 Snowmobile

Brands by name

Popular brands