Polaris 2002 Snowmobile Owner'S Manual Download Page 154

Page: 154 / 181

152

MAINTENANCE

Extended Storage

Track and Suspension

Moderate track tension should be

maintained during summer

storage. The machine should be

supported off the ground to allow

the track to hang freely. See

illustration.

Transporting the Snowmobile

Whenever the snowmobile is transported:
1 Turn the fuel valve

clockwise to “OFF”

to shut off the fuel

supply (1). Turn the

valve

counter-clockwise to

“ON” to turn the fuel

supply on (2).

NOTE:

The fuel

valve is located to the

right of the fuel pump

or behind the airbox,

between the fuel

pump and fuel tank.

2 Be sure the fuel cap and oil cap are installed correctly.
3 Always tie the snowmobile to the transporting unit securely using

suitable straps.

Summary of Contents for 2002 Snowmobile






















































































































































































Search results

Summary of Contents for 2002 Snowmobile

Reviews:

Related manuals for 2002 Snowmobile

Brands by name

Popular brands

Polaris 2002 Snowmobile, Owner'S Manual

Search results

Summary of Contents for 2002 Snowmobile

Reviews:

Related manuals for 2002 Snowmobile

Brands by name

Popular brands