Page 4 of 52
PG2021_SWC-V-ECM_02
General Description
This High- Wall Unit is designed to meet and exceed demanding requirements for efficiency, quiet operation and
appearance. The sleek profile and elegantly styled cabinet complement interior design theme, while the microprocessor
assures accurate environmental control.
Cabinet ~
the stylish cabinet is constructed of durable flame-resistant acrylonitrile-butadiene-styrene (ABS) plastic. The
silver white color and rounded corners provide its modern look.
Water Coil ~
the water coil has a large heat transfer surface and utilizes the latest fin profile technology. It combines an
advanced technology approach with the security of a traditional d esi gn re gar ding tube thickness. The coil is constructed
with seamless copper tubes and headers. The tubes are mechanically expanded into corrugated aluminum fin material for a
permanent primary to secondary surface bond. The coil is tested at 35 bar and recommended for operating at 20 bar
(excluding flexible hoses). It includes manual air vent and water purge valve.
Integral Hoses ~
an integral hose is a synthetic elastomer tube, with stainless steel outer braiding and brass
connectors, which enables quick, low-cost connections with no brazing.
Blower and Motor ~
the unit incorporates only specially designed and tested EC motors, allowing the blower wheel to
provide optimum performance in airflow-efficiency and quiet operation.
Filters ~
washable, easy-to-remove, fine mesh air filters are standard to all high-wall models. Tabs located on the front of
the unit can be unsnapped, allowing the filter to be easily slid downward and removed. No tools are required, nor any
dismantling of the equipment.
Air Grille Distribution ~
all units are equipped with both deflector blades and independent directional vanes, enabling
supply air to be automatically distributed, and air flow and direction to be customized.
CONTROL SYSTEMS
1. Intelligent control (I type)
Intelligent control board is controlled via Infra-red handset and/or Intelligent wired wall pad, is field programmable and easy
to be configured through the wired wall pad or open Modbus protocol with VWV and VAV control logics, provides variable
speed indoor fan control, integrates with Intelligent modulating valves to allow Auto Dynamic Balancing and Intelligent
Constant Delta T management systems. It controls 2-pipe, 2-pipe with electric heater, 2-pipe with 6-way valve and 4-pipe
systems.
2. Flexible control (W type)
This control options features flexible functionality for external thermostat applications, allowing the independent control of
drain pumps (if equipped), offering zone control operations, and limited diagnostics. In products where louvers are required,
this control allows the stepping motors to open the louver at maximum position or close them when power of the unit is OFF.
Cooke Industries - Phone: +64 9 579 2185 Email: [email protected] Web: www.cookeindustries.co.nz
