www.tamson.com
Tamson Instruments bv
Page 4/19
ISO 9001 : 2015
NL/PRO 238239125
van 't Hoffstraat 12
2665 JL Bleiswijk, The Netherlands
T. 31 (0) 10 522 43 73
tcc-b-man Rev 1.01.docx Rev 1.01 UK
2019
VAT: NL 80 66 34 984 B01
Bank account no.:
NL28 INGB 0007 350 370
NL95 RABO 0160100046
Chamber of commerce 27 16 95 41
4
PRECAUTIONS AND HAZARDS
Before attempting to operate the TCC
– B, read all parts of
this manual carefully to insure smooth operation and avoid
damage to the equipment or its accessories.
If a malfunction occurs, consult section "Trouble shooting
”,
page 17. If the problem persists email us via the website
www.tamson.com and the "Contact Us" form.
Never operate the equipment if not correctly installed. The
equipment must be operated only by qualified personnel.
Avoid damage to the equipment or its accessories through
incorrect operation.
Environment
Panel sealing
Conform to EN60529: IP65
Environment Temperature
0 tot 35°C. Supply enough ventilation
Humidity
5 tot 95 %, non condensating
Atmosphere
Not suited for altitudes heights above
2000m
or
explosive/corrosive environment
Pollution cat. 2
Conducting pollution must be prevented
5
INSTALLATION
5.1 Important
Tamson Instruments bv is not responsible for any
consequential damage or harm caused by using this TCC - B.
Repairs on the electrical system of the TCC
– B may only be
carried out by well trained and authorized persons.
5.2 Unpacking
Before leaving the factory Tamson products are adequately
packed to prevent damage during normal transportation.
Check the packing for external damage and make a note on
the shipping documents if any damage is found. Always retain
the cartons and packing material until the product has been
tested and found in good condition. (Transport companies
generally will not honor a claim for damage if the respective
packing material is not available for examination).
5.3 Mount spacers
Mount the two spacers at the backside of the TCC-IC
apparatus.
READ
CAREFULLY
REMOVE ALL
PACKAGE MATERIAL
MOUNT SPACERS
