www.tamson.com
Tamson Instruments bv
Page 13/19
ISO 9001 : 2015
NL/PRO 238239125
van 't Hoffstraat 12
2665 JL Bleiswijk, The Netherlands
T. 31 (0) 10 522 43 73
tcc-b-man Rev 1.01.docx Rev 1.01 UK
2019
VAT: NL 80 66 34 984 B01
Bank account no.:
NL28 INGB 0007 350 370
NL95 RABO 0160100046
Chamber of commerce 27 16 95 41
9
INTRODUCTION TO THE TCC-B SERIES
The TAMSON model TCC-B circulators are designed to
perform accurate temperature control required for general
laboratory. The Tamson circulator is optimized for
temperature control of applications requiring a high degree of
stability over a broad temperature range.
9.1 GENERAL
The TCC-B apparatus consists of a combination of a cooling
system and a microprocessor controlled heating element.
This design ensures a high degree of accuracy and
reproducibility of temperature controls.
The TAMSON baths are constructed throughout from
corrosion-resistant
– stainless steel and Teflon – materials.
The bath is effectively insulated against heat loss by a layer
of Armaflex® rubber between the inner tank and outer casing.
9.2 Pump
A circulation pump is built-in to guarantee an uniform
temperature distribution within the bath and providing the
possibility to circulate through a closed external system.
A circulation pump is provided with a circulation pump with a
capacity of 10 liters / min and a max pressure of 10 m head of
water [10mtr H2O].
The pump speed can be set to a minimum and maximum. To
enable stirring of the bath fluid the pump/stirrer can never be
set to off ("zero speed").
BATH
PUMP MOTOR
HOUSING
CONTROL PANEL
MAINS SWITCH
AIR FLOW
ALWAYS KEEP FREE !
CIRCULATION
INLET AND
OUTLET
Pump speed
