RespiraSense
™
Instructions For Use
RespiraSense
™
PDS-801-007 Revision 2
Page
25
of
77
Addition of an Accessory
Adding an accessory such as a Pulse Oximeter to measure Sp02 can be monitored on the RS app in
addition to the respiratory rate with RS.
If the device is already registered the user can add an accessory on the respiratory rate monitoring
screen through settings and then add accessory. The user has the option of manually adding the
Accessory MAC number or scan the QR code of the device.
Figure 10
: Adding accessory menu
Table 8 Features of the Adding Accessory Menu
Referenc
e
Function
Description
1
Add Accessory
Allows user to manually input the accessory MAC number
2
Camera Icon
Allows user to scan the QR MAC number of the accessory
device
3
Exit button
Takes user back to Lobe Settings when adding a patient or back
to the Respiratory Rate Measurement Function Screen if
accessory is being added to existing patient.
4
Confirm
Confirms the added accessory to be measured
Alarm Function
When the RR of a patient wearing a RS Device equals or exceeds an alarm limit threshold or when the
Lobe is receiving no signal from the Sensor over a prolonged period, an alarm state is entered. An alarm
scenario on the Lobe exhibits as follows:
1.
A flashing Red LED.
2.
An audible alert sounding three times on a 5 second cycle.
To silence the alarm, the user scans the patient’s MRN barcode or selects the patient from the
dashboard. In the case where no Sensor signal is being received, a flashing White LED will then display
to show the user that the Sensor has become detached. This status will eventually result in an alarm
status. Figure 7 shows the popup screen when the user is prompted to pause the Alarm function. See
Section 3
–
Patient Monitoring
for more information.
2
3
3
3
2
3
