6
Notes: please note that do not let the power line be damaged by trundles when pushing the
medical refrigerator.
Notes: be sure to take off the packaging pedestal on the bottom of the medical refrigerator.
Notes: Do not put goods into the medical refrigerator which is just plugged in. Let the empty
body run for
a while (about 12 hours) and then put the goods to be refrigerated into the refrigerator.
Normal operating condition of the equipment:
Environmental temperature: 10
℃～
32
℃；
Relative humidity: ≤80
％；
There is no strong sharp pounding and corrosive gas around;
There are no effects of direct radiation of sunshine and other cold and heat sources.
Working system of the medical refrigerator: intermittent running
Safety precautions
❖
Supply voltage: the equipment needs 220V/50Hz alternating current power supply. If the service voltage
is lower than 187V or higher than 242V, it is necessary to add a proper automatic voltage regulator to be
used cooperatively;
❖
When the medical refrigerator is used, the power supply is required to be equipped with a lower voltage
air circuit breaker and a leakage protection device;
❖
It is necessary to use a dedicated independent socket which is grounded reliably. The length of the
power line cannot be lengthened at randomly. If it really needs to be lengthened, be sure to use a cooper
core conductor which is larger than 2.5mm2. And the cross area of the copper core conductor which is in
the wall and connected with the power socket must be above 4mm2
；
❖
Inflammable and explosive dangerous goods and goods of acid and alkali etc. with strong corrosiveness
are not allowed to be put into the medical refrigerator;
❖
Keys should be kept properly to avoid accidents that will happen if children get the key to open the
door;·he zero line (N end) of the socket cannot be connected with the ground lead (E end). Otherwise,
the housing of the medical refrigerator may be electrified and electric shock accidents may be caused;
❖
The power line cannot be bundled up, pressed under weight and next to heat sources of compressor,
etc.
