Plymovent MDB-2/HV, Installation And User Manual

Page: 11 / 24

0000112315/011017/0 MDB-2/HV EN - 10
symptom Problem Possible cause solution
Green control
light
ruNNING
is off, but fan
is running
Wrong status
indication
Status indicator
light is broken
Replace green light
Dust from
dustbin
System is
leaking
Quick connect
clamp not
correctly
installed
Install the quick
connect clamp
correctly
The system
does not start
System not
working
System turned
off by
PROGRAM
ON/OFF
button .
Turn the
PROGRAM
ON/OFF
button
Main switch
turned off
Turn on the main
switch
Wrong date /
time setting in
PlC
Correct the date /
time setting (ref.
Fig. III on page
20)
Wrong weekly
timer setting in
PlC
Correct the weekly
timer setting (ref.
Fig. IV on page
21)
System has
been powered
down (no mains
during 80
hours)
Reprogram current
date and time in
the PLC (ref. Fig.
III on page 20)
Install a battery
pack and
reprogram current
date and time to
avoid future
problems
8 sPaRE PaRTs
The following spare parts are available for the product (refer to
exploded view Fig. VI on page 22).
article no. description
0000100297 CART-PTFE/10 / Filter cartridge
0000101900 Magnetic valve MDB, incl. 24V AC coil and 3 m (10 ft)
cable
0000102411 Drain valve ½ inch MDB
0000102584 Lock kit for filter cartridge
0000102598 Star knob M12
0000102666 Lid for filter cartridge
0000102675 Filter cartridge holder
0000111381 DB-80 / Dustbin 80 litres, incl. lifting pin and handles
0000111622 Lid for dustbin DB-80
0324000310 Control light green 24V
0324000320 Control light red 24V
A [on request] HV fan
B [on request] Cooling fan
9 ElECTRiCal diagRam
Refer to the separately supplied electrical diagram.
10 disPOsal
Dismantling and disposal of the unit must be done by qualified
persons.
Personal protective equipment (PPE)
Wear respiratory protection and protective
gloves when you dismantle and dispose of
the unit.
10.1 dismantling
To safely dismantle the unit, obey the safety instructions that
follow.
Before dismantling of the unit:
- disconnect it from the mains
- disconnect it from the compressed air
- clean the outside
During dismantling of the unit:
- make sure that the area is sufficiently ventilated, e.g. by a
mobile ventilation unit
After dismantling of the unit:
- clean the dismantling area
10.2 disposal
Dispose of the pollutants and dust, together with the used
filter cartridges, in a professional manner in accordance with
federal, state or local regulations.
CE dEClaRaTiON
CE declaration of conformity for machinery
We, Plymovent Manufacturing B.V., Wezelkoog 11, 1822 BL
Alkmaar, the Netherlands, herewith declare, on our own
responsibility, that the machine:
- MDB-2/HV
which this declaration refers to, are in accordance with the
conditions of the following Directives:
- Machine Directive 2006/42 EC
- EMC 2014/30 Eu
- lVD 2014/35 Eu
- ErP Directive 2009/125 EC
Alkmaar, Netherlands, 1 October 2017
M.S.J. Ligthart