Chapter I. Setup the NVR
Before you setup the NVR (Network Video Recorder), please make sure all
components available and ready.
A list of the package contents is provided in the
Box Contents
section of this guide. If any items are damaged or missing, please
contact the vendor where you purchased your NVR or our customer service directly.
Set up the NVR System
To set up the NVR system in your LAN environment:
1. Plug the RJ-45 connector into LAN port of NVR and IP camera RJ-45 port.
2. Plug the RJ-45 connector into WAN port with Router’s LAN port.
3. Turn on the Router (Router with UPnP on/off function is recommended).
4. Plug the AC adapter into the DC-jack of the NVR. Attach the power cable to
the AC adapter. Plug the other end of the power cable into a standard AC
power outlet.
5. Connect PC or Laptop with Router LAN port.
6. Insert the Installation CD, included with your NVR, into your CD-ROM drive.
5
