Information
Please consult your network administrator or ISP for the IP
number of your NVR.
Reset the NVR
The reset function of the NVR allows you to set the NVR to its factory default settings.
To reset the NVR, please keep your NVR connected to your network and follow the
steps:
1. Insert the reset pin into the reset hole at the side of the NVR.
2. Stab the reset button with the pin for 5 seconds.
3. All settings are reset to their factory default settings.
Attention
All the settings you’ve configured in the NVR will be lost after
resetting. Please make sure to
back up the settings
you need
before resetting.
Turn off the NVR
To turn off the NVR, please follow the steps:
1. Insert the pin into the Power hole at the rear side of the NVR.
2. Stab the Power hole with the pin for 5 seconds.
3. The NVR will be turned off.
36
