E-20
CB Setup Procedure (Setting the Time)
The date and time are stamped on the printing paper and recorded in the file information when files are stored
on the copyboard, so set the copyboard’s time correctly.
Description of Operations
1
Switch to “CB Setup”.
With the power turned on, press the Number of Copies
but-
ton while pressing the ON/Standby
button, then release the
ON/Standby
button.
2
Press the Save button and switch to “Time Setting”.
The mode switches each time the Save button is pressed.
Contents of setting mode displayed on display window
(First 2 digits)
(Last 2 digits)
Christian year
Month
Day
Hours
Minutes
3
Set the setting mode’s date and time.
When the Color Print
or B/W Print
button is pressed once, the setting can be
made.
Use the Color Print
(Increase) and B/W Print
(Decrease) buttons to set.
4
Press the Save button to enter the setting.
The copyboard switches to the next setting position.
Repeat steps 4 and 5 to set the current date and time.
• If the ON/Standby
button is pressed during steps 3 to 5, the partially made
setting is canceled and the date and time return to the values set before the set-
ting was started.
5
Complete the setting.
When the Save
button is pressed after the minute’s setting position (c.6 display)
has been set, the “Time Setting” is completed and the [F1] display (CB Setup) reap-
pears. Press the ON/Standby
button to return to the normal mode.
[Example]: Setting the date and time to 2:16 pm October 8, 2020
Press the ON/Standby
button to turn on the
power.
The display window’s LEDs light and the power turns on.
Normal mode
Press the Number of Copies
button while
pressing the ON/Standby
button, then release
the ON/Standby
button.
The mode switches to “CB Setup”, and “F1” is displayed on the
display window’s LEDs.
The mode returns to the normal mode if no buttons are oper-
ated for 10 seconds.
“CB Setup” mode
While “F1” is displayed, press the Save button
to enter.
The display switches to “c1” (first 2 digits of year).
If no buttons are operated for 10 seconds while in the time set-
ting mode, the mode returns to the “CB Setup” mode.
