E-13
Printing
Press the Color Print or the B/W Print button to print.
or
• The reading operation is performed for a one-sheet portion (while the sheet is scrolled) and the printing operation is
performed.
Cancellation of the print operation in progress
When the ON/Standby button is pressed, the reading of the sheet stops, and the partially read image data is printed.
Wait until the sheet is expelled from the printer.
Note
• If the ON/Standby
button is pressed while the sheet surface is being read, printing is interrupted and only part
of the image will be printed.
To move the sheet surface, wait until scrolling stops, then press the Scroll/Stop button .
• The one-screen portion is reduced to A4 paper size and printed.
For wide type copyboards (model M-18W), the image is compressed about 75% in the horizontal direction. To
print with the same proportions as the image on the sheet surface, see “Making the Device Settings” (page E-22).
• A flashing “
” in the display window indicates a print error. See “Meaning of Error Messages” on Page E-24.
• When printing, a time stamp (date and time) is printed at the top right of the sheet. See “Making the Device Set-
tings” on page E-22.
When the copyboard is not going to be used, press the ON/Standby
button and switch
off the power (standby mode).
• Switch off the printer power.
Note
• If no button is operated within 30 seconds, the power turns off automatically (auto power off).
When the power is turned off, scanned images stored in the unit’s internal memory are cleared.
• The auto power off function is canceled when the copyboard and computer are connected by USB cable.
Moving the sheet surface manually
The sheet can be moved even when the power of the copyboard is switched off.
The sheet can be moved with your hand either in left or right. Please place your
hand at the vertical center and move the sheet slowly.
Notice
• Quick movement can cause damage to the drive mechanism of the copy-
board.
