E-17
When the copyboard and a computer are connected by USB cable, the copyboard is recognized as an exter-
nal memory device (removable device). Below is the procedure for copying the “CBImage” file from this device
onto the computer.
Images can be stored in JPEG (.jpg), PNG (.png) or PDF (.pdf) format, selectable in the main unit settings . (See
pages E-19.)
Notice
• Only one sheet’s worth of data can be stored in the copyboard’s internal memory.
When the storage procedure is performed successively on the copyboard, the data is overwritten.
• The image data in the copyboard’s internal memory is cleared when the USB connection between the copyboard and com-
puter is cut off.
• Do not save data from a computer into the copyboard’s internal memory.
• The copyboard’s internal memory cannot be formatted from a computer.
• Do not disconnect the USB cable or access the copyboard while the data is being saved after pressing the copyboard’s
Save ( ) button/. Doing so may cause operation of the computer to become unstable.
• Do not press any operation buttons on the main unit while the copyboard’s internal memory is being accessed from the
computer. The response time could be long and the operation may not be possible.
Turn on the copyboard’s power and connect the PC dedicated USB port (type B) and com-
puter using the USB cable.
• The standard driver is installed automatically and the copyboard is identified by the computer as a removable device.
To computer’s USB port
(type A)
USB cable included with
copyboard
To PC dedicated USB port
(type B)
Press the Save button to store.
Display window
Flashing indicator “rotates” sequentially during USB memory stor-
age operation.
• One sheet’s worth of the screen is scanned (scrolled) and storing in the memory for computer storage starts once
scrolling stops.
The LEDs on the display window flash in a circular motion during saving in the memory for computer storage.
Launch Explorer and open this unit’s removable device.
(1) When the device icon for the main unit (displayed as a removable disk) is double-clicked, the main unit’s internal
memory opens.
The “CBImage” file is the scanned image file (“.jpg”, “.png” or “.pdf”, according to setting).
(2) Copy the “CBImage” file to [My Documents], etc., on the computer (“.jpg”, “.png” or “.pdf”, according to setting).
Perform the USB disconnection operation on the computer before disconnecting the USB cable.
Note that the image data in the main unit’s computer storage memory is deleted if the operation for disconnecting the
USB connection between the main unit and computer is performed at this time.
Using the copyboard connected to a computer
