E-14
Using USB Memory
The content of what has been drawn on the sheet surface of the copyboard can be saved in USB memory.
Later, the saved image can be read into a personal computer and made into a document of the proceedings of
the meeting, or affixed to a document.
The name of the folder on the USB memory device is “CB_Image”. Image files are stored in this folder.
By factory setting upon purchase, image files are named “PV-xxx.pdf” (PDF files), where “xxx” refers to a
3-digit number starting from 001 (ex.: PV-001.pdf).
Notice
• No USB flash memory device is included. When purchasing a USB flash memory device, pay attention to the following:
1. USB flash memory devices formatted in FAT16/FAT32 are supported. USB flash memory devices in NTFS/exFAT format
cannot be used.
2. USB flash memory devices protected by a security function cannot be used.
3. USB flash memory devices with a capacity of over 32 GB cannot be used.
4. If the USB flash memory device is divided into multiple partitions, only one partition can be recognized with this unit.
• See the PLUS website for more information on USB memory devices usable with this unit.
USB Memory Storage Procedure
Preparation:
Check that the copyboard’s AC power plug is connected to a wall power outlet. See page E-10.
Press the ON/Standby
button and switch on the power.
Note
• When turning on the power, wait about 5 seconds after connecting the
copyboard’s AC power plug to the wall power outlet or after turning off the
power (standby mode) before pressing the ON/Standby button.
• Press the ON/Standby button to switch on the power. The LED of the
display window will light.
Insert the USB memory device into
the USB A Memory
port of the
copyboard.
Notice
• Check the side (polarity) of the USB mem-
ory device before inserting it. Forcing it
in the reverse orientation will damage the
USB A Memory port or USB memory
device.
• Be careful not to bump into the USB
memory device with hand or body while
it is mounted. Doing so could damage the
USB memory device or USB A Memory
port.
