Installation Procedure
Installing the Plugreen Solar micro-inverter system involves the following steps:
Installing the AC branch circuit junction box
Mount the Plugreen Solar micro-inverters on the rack
Lay the AC common cable along the rack using mounting hooks
Connect the individual micro inverter on the common cable
Ground the system using suitable copper wire
Connect the PV modules to solar micro-inverters
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
STEP 6
Refer the installation diagram below for better understanding
Do not connect Plugreen Solar micro-inverters to the utility grid or energize the AC
circuit(s) until you have completed all of the installation procedures as described in the following
sections
WARNING:
4
Copyright Plugreen Corporation. 2011 1-00001 REV 1
WARNING:
Do not connect Plugreen Solar Micro Inverter to a off grid like Inverter, UPS or
Generator
