8
4.
Overview of Parts (AR-260 and AR-350)
Number
Name
Function
01
Trolley
Move Ceiling Hoist along the rail.
02
Magnet (optional)
Activate the Sensors in a Turntable, Switch and Coupling.
03
Wheel Cap
Cover on Bearing.
04
Strap Tension Switch
Activates the Ceiling Hoist when tension is put on Lifting Tape.
05
Height limit switch
Turns off the Ceiling Hoist at the end of the Lifting Tape.
06
Lifting Tape
Lifting Tape used for lifting.
07
Lifting Tape connector
Attachment point for an electronic or mechanic Spreader Bar.
08
Motor
Rotates the Spool which winds the Lifting Tape
09
Printed circuit board
Controls the Ceiling Hoist.
10
End Switch Lifting Tape
Turns off the Ceiling Hoist at the end of the Lifting Tape.
11
Battery (2 pcs)
Battery 12 volt, 5 Amperes.
12
Electronic brake
Stops the Motor when not in use.
13
Hand Control
Operating and charging of Ceiling Hoist.
14
Height limit plate
Stops the Ceiling Hoist at highest position.
15
Height limit switch
Stops the Ceiling Hoist at highest position.
16
Emergency stop (Cord)
Deactivates the Ceiling Hoist in case of Emergency and lowers load.
17
Lifting Tape clamp
Pushes Height limit plate and stores Hand Control
Figure 3, Overview AR-260 and AR-350
