Call
Call signals may be initiated by entities across the CB2 wireless system. Each 2-Wire intercom port may
be individually set to send and receive a CB2-wireless-system-generated call signal to or from a
compatible connected wired intercom system by enabling the Call function for that port. Disabling the
Call function for that port prevents the signal from leaving the CB2 wireless system via the respective
port.
l
Call
: An RP Function button option. When enabled for wireless devices, the user can elect to send
a call signal to the RPs of a single assigned channel. When enabled for external hardwired
intercom devices, a signal will be sent to any connected 2-wire devices associated with the RP's
channel (as long as outbound call is enabled for the associated BaseStation port). Call can be
enabled for both wireless and hardwired devices or limited to only one type.
See
.
Set Up Call
Each BaseStation wired intercom port (2-Wire only) can be individually set to send and receive a CB2-
wireless-system-generated call signal to/from a connected wired intercom system. To do so, turn that
port’s Call function
ON
. Turning the Call function
OFF
only prevents the signal from entering or leaving
the CB2 wireless system via the respective port. Call signals can still be generated and transmitted by
entities across the CB2 wireless system. See
"Intercom Settings Menu" on page 52
for more information
about this process.
In addition to enabling Call for the BaseStation port(s), you will need to enable Call for each Radio Pack.
Enable Call on BaseStation 2-Wire Port
See
"2-Wire Intercom Connectivity" on page 56
for more information.
Enable Call on Radio Pack
See
"Radio Pack Settings Menu" on page 68
for more information.
Operation - 75
