Radio Pack LEDs
Each LED on the Radio Pack indicates a particular condition or status for the device. See the table below
for details about each meaning.
Radio Pack LEDs
LED
Description
All Pack
LEDs
On - Boot up indication
Blinking simultaneously - Pack is logged out
Brief simultaneous blinking - Profile update in progress
Channel
Button
LEDs
A
On (
Green
) - Channel A enabled
Off - Channel A disabled
B
On (
Green
) - Channel B enabled
Off - Channel B disabled
1 Blink
Unpaired / No Pairing Found - The RP is not paired, either
because it was unpaired or pairing was never found.
2 Blinks
No CB2 Found - The RP could not find any of the CB2s in its scan
list.
Alternating Blinks
Firmware update in progress.
A & B Continuous
Blinking
Charging (blinking stops when charging completes)
Talk LED
On (
Green
) - Talk Enabled
Off - Talk Disabled
1 Blink - Unknown Error: An error was reported, but it was an unknown error.
2 Blinks - SKU/Radio Mismatch
3 Blinks - Band Configuration Error
4 Blinks - Invalid Scan List Entry
5 Blinks - Incompatible Radio Firmware
6 Blinks - Radio Hardware Error
7 Blinks - Calibration Error
8 Blinks - Radio Update Error
9 Blinks - Flash Locked
Operation - 73
