Aux Out Connection
To connect and configure Aux OUT, connect an external device to Aux OUT via the 1/4 in. (6.35 mm)
TRS jack. Then, configure the connection via the BaseStation's menu.
Audio supplied from Aux OUT can be assigned from either Channel A or Channel B. The default setting
for Aux OUT Level is "0." To adjust the Aux OUT level or the assigned Channel, press
Menu
to open the
main menu, scroll through the menu options to the
Wired Settings,
and select
Aux Out.
1. Use the navigation controls to scroll to the Master Level bar. Press
Enter
to select it.
Note
: Individual Aux Out assignment level adjustments are not currently supported.
2. Use the navigation controls to adjust the current value displayed on the LCD.
3. Press
Enter
to save; or
Menu/Home
to escape without saving changes.
Audio levels are expressed as a numerical value from -10 to +10. The Aux Out assignment can be muted
or unmuted from this menu as well.
Figure 33
Aux OUT Level
Operation - 65
