Local Headset
The following settings can be accessed by pressing the LOCAL button on the front panel of the
BaseStation or by pressing
Menu
and navigating to
Local Headset Settings
.
Selecting the Local Headset Channel
The BaseStation headset connector is a functional user communication point. The Front Panel Headset
allows you to communicate on either Channel A or B. Change the active channel by pressing in on the
Local Headset volume knob.
Changing the Local Headset Mic Gain
For dynamic microphones, select from within a range of +6 to +35 dB. For electret microphones, select
from within a range of -12 to +17 dB. When the Mic Gain is set too high, it is possible to induce clipping,
feedback, or echo. When set too low, words may sound too quiet to other listeners. Headsets by different
manufacturers or different models of headsets will require widely varying Mic Gain settings.
The default setting for dynamic local mic gain is "6" (+23 dB). The default setting for electret local mic
gain is "3" (–4 dB).
Selecting the Local Headset Mic Type
Select from
Auto-detect
,
Dynamic
, or
Electret
mic type. If you select a mic type that does not match
the detected type of the connected mic, you will be prompted to accept the exception. It is highly
recommended that the default
Auto-detect
is used.
Adjusting the Local Headset Sidetone
Sidetone value is expressed in dB. When adjusting sidetone, you will see a level indicator with a numeric
value between 0 dB and -24 dB. The default setting for local headset sidetone is "Med" (-12 dB). Speak
into the headset microphone at a typical speaking level and adjust the sound of your own voice in your
headset. Press
Enter
to accept the changes.
Operation - 70
