Radio Pack Settings Menu
The Radio Pack (RP-12) can be configured depending on user preferences. The following settings and
processes can be found in the individual RP's settings menu (within the BaseStation's menu under
Radio Pack Settings.
) To enter the RP's menu mode, press and hold the Radio Pack menu button
AND press and hold the BaseStation menu button. When both menu buttons are depressed for three
seconds, the menu mode is enabled.
Talk Button
Use the BaseStation's navigation controls to select either
Momentary
or
Latch
talk button behavior.
When
Momentary
is selected, the RP user must press and hold the talk button when they wish to talk.
Channel Button
Use the BaseStation's navigation controls to select from
A or B
,
A only
, or
B only
. When
A or B
is
selected, the RP user must use the Channel Selection button on his or her RP to switch between the
channels. The LED for the selected channel will be illuminated.
Call Button (F1)
Use the BaseStation's navigation controls to select either
Enable
or
Disable
to set the F1 button's
function. When the Call button is enabled, the RP user must press the Call button on his or her RP to
engage Call. See
for more information.
Stage Button (F2)
Use the BaseStation's navigation controls to select either
Enable
or
Disable
to set the F2 button's
function. When the Stage button is enabled, the RP user must press the Stage button on his or her RP to
engage Stage Announce. See
for more information.
Operation - 68
