Section 4. Using Your PlexWriter
40
PlexWriter 12/4/32 Operation Manual
Figure 20: Loading the Tray
4. Press the Stop/Eject button again and the tray slides shut within seconds.
NOTE: Always use the Stop/Eject button to close the tray in a smooth and secure
manner. Closing the tray by pressing the front of the drawer by hand is not
recommended and risks damage or premature wearing of the mechanism.
Handling CD Media
Take care when handling blank CD-R and CD-RW media. Dust, scratches, and
fingerprints on the data side of the disc can cause write errors during recording.
When picking up or holding blank media you can either place your fingers along the
outer edge of the disc, or place one finger through the center hole and one finger on
the outer edge. Once you have finished creating a disc, label it by writing on the top
using permanent ink.
NOTE: We do not recommend placing self-sticking CD-R labels on the disc. The
weight of the label may unbalance the disc and cause write errors during recording or
read errors during reading.
Cleaning Discs
For proper read and write performance, your CD-R, CD-RW, and CD-ROM discs
must be clean. Trying to record on a dirty disc may result in a failed session and ruin
the disc.
To clean the disc, wipe the disc using a clean, soft cotton cloth to remove surface dirt
such as fingerprints. Use a straight-line motion, wiping from the center out. Do not
wipe the disc in a circular motion.
