PlexCombo 20/10/40-12A Installation and Users Manual
57
Appendix A: PlexCombo Specifications
Minimum System Requirements
Computer
Pentium II 350 MHz CPU or faster.
Minimum RAM
64 MB
Hard Disk Size
800 MB to 1 GB of free space to write to a CD in image
mode
ATAPI Settings
DMA should be set to ON.
IDE controller should be set to PIO Mode4/DMA Mode2
or Auto in the motherboard BIOS.
Operating System
Windows XP, Me, 2000, 98, 95; or Macintosh
Recommended Media
CD-R: 20X
To ensure 20X write speed, Plextor recommends using
only certified 20X media available from Ricoh, Taiyo
Yuden, Mitsui Chemicals, Kodak, Maxell, Fuji (Futalo),
Verbatim /Mitsubishi Chemical
(With PoweRec, some poorer quality discs are recorded
at 16X)
Note: For the latest updated list of certified 20X media,
see Plextor’s web site at:
http://www.plextor.com
CD-R: 16X
Taiyo Yuden, TDK, Ricoh, Mitsui Chemicals, Kodak,
Maxell, Fuji (Cyanine), Verbatim /Mitsubishi Chemical
CD-R: 1X-12X
Taiyo Yuden, TDK, Mitsui Chemicals, Ricoh, Kodak, Fuji
Photo Film, Maxell, Verbatim /Mitsubishi Chemical
CD-RW
Ricoh, Verbatim /Mitsubishi Chemical
(All are rewritable up to 1,000 times.)
Supported Media
Supported Media,
Stamped CD
Red, Yellow Book-compliant discs
Supported Media, DVD
DVD single/dual layer, DVD-R, DVD-RW (Ver. 1.0 and
1.1)
Supported Media, CD-R
Orange Book Pt II-compliant discs (Type 74, Type 80)
Supported Media Size
12 cm