MPS6100-M OPERATION MANUAL
ORIGINAL INSTRUCTIONS
Page 17
4.2
USE OF NON APPROVED LUBRICANTS
The MPS 6100 comes from the factory containing specific lubricants on two
separate parts of the machine the gear box and the product conveying belts contained within
the in-feed rail assembly. Please use lubricants which meet or exceed the specifications of the
factory installed lubricants shown in table 2 below.
CAUTION: Only qualified service personnel should attempt replacing the lubricants on this
machine, please refer to the maintenance manual for procedures.
LOCATION
TYPE/SPECIFICATION
GEAR BOX
•
Multipurpose Lithium Soap Based grease
•
NLGI Grade 2 Lubricating grease
CONVEYING BELTS
•
Food Grade Non-Toxic Clear Grease
•
Broad operating temperature, with a high
dropping point
4.3
STANDING ON THE MACHINE
The MPS 6100 series is a physically stable design however by no means should one
attempt to stand or rest on any part of the machine. Do not attempt to place any other items
on the machine which can cause the machine to become unstable.
CAUTION: Do not attempt to stand on or place any other items on any part of the machine.
The equipment may become unstable and pose a risk of tipping on to the operator causing
bodily harm.
TABLE - 2
