MPS6100-M OPERATION MANUAL
ORIGINAL INSTRUCTIONS
Page 8
4)
Next, the sealing head (control box and rails) must be attached to the stand. Simply place
the upper two support knobs on either side of the control box into the upper slots on
the stand. Next, gently swing the sealing section down into place. The sealing section will
be attached as in Figure #5.
5)
Install the locking bolts to ensure the sealing section is held securely in place.
2.3
UNPACKING THE MPS 6140 SERIES
To reduce risk of damage during shipping, the MPS 6140 table-top model is securely
packed in one piece. If an optional product shelf was ordered, this piece will be packed
separately and will need to be assembled to the MPS 6140.
1)
Open the box then remove the first layer of plastic wrap and foam to uncover the MPS
6140. Carefully lift the assembly out of the box and set aside.
Upper Support
Knob
Locking
Bolts
Lower
Support
Control Box
Mounting Bracket
FIGURE - 5
