Pleora Technologies iPort SB-Pro, User Manual, Page: 28 / 55

28 Assembling the iPORT SB-Pro IP Engine
Copyright © 2011 Pleora Technologies Inc.
NOTE! The iPORT SB-Pro IP engine does not require a crossover cable to adjust the pinout signals to
communicate through a switch, or directly to a host PC. It also adjusts the data rate automati-
cally to transmit at 10 Mbps, 100 Mbps, or 1 Gbps.
Cable Summary
Cable From Cable To Description Mfr. Part Number Mfr.
J5 (daughter card) J1 (adapter board) 20-pin FFC, 2” length,
0.5mm pitch
050R20-51B A Parlex
J8 (daughter card) Sony FCB-H11 10-pin fine pitch coax,
150mm length, 0.5mm pitch SSL20-10SSB-015-
CH Kel
J7 (daughter card) Sony FCB-H11 24-pin FFC, 3” length,
0.5mm pitch 21021-0253 Molex
Main board (x2) Daughter card
(x2) 50-pin FFC,0.5mm pitch 050R50-XXXXB A,
where XXXX is the
length of 0001 to
9999 in mm
Parlex
a
a. Compatible with Hirose connector FH12-50S-0.5SV to MIL-STD-810F, Method 514.6: 5-2000 Hz. 7.7 gs.
NOTE! Source manufacturer, description and identification may vary for each component.