Pleora Technologies iPort SB-Pro, User Manual, Page: 27 / 55

27
Copyright © 2011 Pleora Technologies Inc.
Ethernet Interface
The Ethernet interface of the SB-Pro IP engine can operate at 10, 100 or 1000 Mbps. The IP engine
supports Internet Protocol IPv4, which is the fourth iteration of this IP communication standard. It is the
dominant network layer protocol on the Internet.
IP Engine Connector Summary
The connector and cable summaries for the iPORT SB-Pro IP engine are listed below.
NOTE! The iPORT SB-Pro IP engine also has 50-pin FFC connectors between its main board and
daughter card. These connections are not described in this document, as they are not interfaces
which are external to the IP engine.
NOTE! Source manufacturer, description and identification may vary for each component.
Connector Summary
Component
ID
Location Description
Mfr. Part
Number
Mfr.
J1 Main board RJ-45 jack, green/
green LED, hori-
zontal HFJ11-1G11E-
L11RL Halo
J8 Daughter card 10-pin fine pitch
coax connector,
0.5mm pitch, SMD SSL00-10L3-0500 Kel
J1 Adapter board 12-pin circular
connector, male HR10A-10R-
12PB(71) Hirose
UI Adapter board 20-pin FPC/FFC
connector, 0.5mm
pitch, horizontal,
SMD FH12-20S-
0.5SH(55) Hirose
J5 Daughter card 20-pin FPC/FFC
connector, 0.5mm
pitch, horizontal,
SMD FH12-20S-
0.5SH(55) Hirose
J7 Daughter card 24-pin FPC/FFC
connector, 0.5mm
pitch, SMD 62674-
241121ALF FCI