54
iPORT Advanced Features User Guide
Creating a Demonstration Environment
You can use the example provided in the following diagram to create a demonstration environment that
allows you to follow and test the procedures provided in this chapter.
Figure 3: PLC Demonstration Example
Video Interface
IR Sensor
Terminal Block
LED Light
GpioOut0
GPIO
GpioIn0
Computer with
eBUS SDK, eBUS Player
10GigE NIC
Camera
Conveyor
Belt
Object
1
Object
2
Object
3
eBUS SDK, eBUS Player
C
Computer with
ompu
t
ter w
it
it
h
h
PLC
The usage examples included in this section make extensive use of the GpioOut0 signal, which maps to a
pin on the 12-pin circular connector for your video interface. Please refer to the documentation for your
video interface to locate and attach this pin to the voltage indicator. The ground pin on the 12-pin circular
connector must be tied to the ground probe on the voltmeter or oscilloscope.
Summary of Contents for iPORT CL-Ten
