Pleora Technologies iPORT CL-Ten, User Manual, Page: 45 / 72

41 Configuring Action Commands Using IEEE 1588 Precision Time Protocol (PTP)
To configure a video interface to send an action command acknowledgement
1. Start eBUS Player and connect to the video interface.
2. Select
Tools
>
GigE Vision Action Command
.
3. In the
Action Command
panel, select the
Request Acknowledgements
check box.
Broadcasting Action Commands
You can broadcast action commands using eBUS Player running on either a primary or secondary
computer.
Broadcasting Action Commands from a Primary Computer
Using eBUS Player running on a primary computer, you can broadcast action commands to all devices
on the subnet from a port, as shown in the following diagram.
Figure 1: Broadcasting Actions from a Primary Computer
OK The action command was sent and received and will be executed at the
specified scheduled time.
Overflow The PlcActionTrigQueue buffer is full (32 commands are stored in the
queue)
Table 10: Action Command Acknowledgement Descriptions
Acknowledgement Description