manualshive.com logo in svg

Pleora Technologies iPORT CL-Ten, User Manual, Page: 2 / 72

Share
Download
Pleora Technologies iPORT CL-Ten User Manual Download Page 2

Copyright © 201

8

 Pleora Technologies Inc.

These products are not intended for use in life support appliances, devices, or systems where malfunction of these products can 
reasonably be expected to result in personal injury. Pleora Technologies Inc. (Pleora) customers using or selling these products for 
use in such applications do so at their own risk and agree to indemnify Pleora for any damages resulting from such improper use or 
sale.

Trademarks

PureGEV, eBUS, iPORT, vDisplay, AutoGEV, AutoGen, and all product logos are trademarks of Pleora Technologies. Third party 
copyrights and trademarks are the property of their respective owners.

Notice of Rights

All information provided in this manual is believed to be accurate and reliable. No responsibility is assumed by Pleora for its use. 
Pleora reserves the right to make changes to this information without notice. Redistribution of this manual in whole or in part, by 
any means, is prohibited without obtaining prior permission from Pleora. 

Document Number

EX001-000-0003, Version 

3.0

, 

6

/

04

/1

8

Summary of Contents for iPORT CL-Ten









































































Reviews:

No comments