42
iPORT Advanced Features User Guide
Broadcasting from a Secondary Computer
Action commands can also be sent by a second eBUS Player application running on a secondary computer
or another device on the same subnet, as shown in the following diagram.
Figure 2: Broadcasting Action Commands from a Secondary Computer
ActionUnconditionalMode
You can use eBUS Player, connected on a network, to send action commands to devices when eBUS
Player is not directly connected to the devices if you first take the following steps:
•
Ensure all NICs and devices are on the same subnet (either configured as LLA or with persistent/
static IPs)
•
Configure the
Device Key
,
Group Key
and
Group Mask
of each device
•
Set
ActionUnconditionalMode
to
True
•
Disconnect each device from eBUS Player.
You can now use a secondary application to send action commands to these devices.
Summary of Contents for iPORT CL-Ten
