2
3
1
9
Electric Fireplace Insert 18/
23
The fireplace features conveniently separate controls for flame effect and for heater control.
This allows you to operate the unit in two (2) different modes:
•
As a full-featured fireplace
- both flame effect and heater are on.This mode
allows you to enjoy the look of the fire along with the heat output of a heater.
•
As a visual effect
- only the flame effect is on, the heater is off. We recommend this mode for
warm weather application, when you want the ambiance of a fire, without any heat output.
The fireplace control functions can be accessed in two (2) ways:
• Using the touchpad control panel, located in the upper right-hand corner of the fireplace
behind the hinged control access door.
• Using the multifunction remote control unit.
Main Power Button:
This button supplies power to all the functions of the fireplace. The Main power button must be
in the
ON
position, either from the remote or on the touch pad for the functions to work.
Heater Control Button:
This button controls the heater
ON/OFF
and 5 temperature modes from High to Low. When the
fireplace is first turned on, the heater will come on at the highest room temperature setting.
Each time the Temperature button is pressed, the temperature set point decreases, allowing you
to adjust the ambient temperature.
Flame Control button:
This button controls the brightness of the flame effect with settings at High, Medium and Low.
When the fireplace is first turned on, the flame will come on at the highest setting. Each time the
Flame button is pressed, the flame brightness decreases. The only way to turn off the flame effect
completely is to turn off the Main Power button.
1.
2.
3.
Operating Instructions - Fireplace Control Functions
Control Panel
Figure 3 / Control Panel
