12
The 18” models use two (2) 40 watt, E-12 socket base light bulbs. The 23” models use two (2) 60 watt, E-12
socket base light bulbs. These are small base bulbs typically found in chadeliers with candle shaped bulbs.
The bulbs are located underneath the logset/ emberbed. For convenience, if one of the bulbs burns out, it may
be easier to replace both of the bulbs at the same time.
Replacing the Light Bulbs
Before attempting ANY maintenance:
1. Turn off power to the unit.
2. Unplug the power cord from outlet.
3. Let fireplace cool if it has been operating.
Electric Fireplace Insert 18/
23
WARNING: Do not replace bulbs with higher wattage bulbs. Use of higher
rated bulbs may result in a fire, causing property damage, personal injury,
or loss of life.
1. Turn off power to the unit and
ensure that it is unplugged
from the electrical outlet.
2. Let the fireplace cool if it has
been operating.
Thumb Screws
3. Remove the glass front from
the unit by unscrewing the
two thumbscrews counter-
clockwise at the top of
the glass door.
See Figure 5.
Figure 5
4. Locate the two log set bolts
on the left and right side of
the top of the ember bed and
remove them by unscrewing
them counterclockwise .
See Figure 6.
Figure 6
Log Bolts