1. Under no circumstances should this product be operated with broken glass.
2. Do not strike or slam the glass.
3. Do not use abrasive cleaners to clean the glass.
4. This product uses tempered glass. Replacement of the glass supplied by the
manufacturer should be done by a qualified service person.
Always disconnect the appliance from the main power supply
and allow it to cool before any servicing operation.
The motors used on the fan heater and flame blower are pre-lubricated for extended bearing life
and require no further lubrication. However, periodic cleaning/vacuuming of the appliance around
the air intake and exhaust, as well as the fan heater is recommended. For heavy or continuous use,
periodic cleaning must be done more frequently. If the heater blows alternating cold and warm air,
check the fan for free movement and for debris restricting air flow. If the fan does not move freely, the
unit must be turned off and the fan replaced immediately in order to prevent further damage to the unit.
Before attempting ANY maintenance:
1. Turn off power to the unit.
2. Unplug the power cord from outlet.
3. Let fireplace cool if it has been operating.
11
Care and Maintenance
Glass Information
Maintenance of Motors
Cleaning
Cleaning of the control panel, located in the upper right-hand corner of the fireplace behind the hinged
control access door, is to be done only using a soft cloth, slightly dampened in water (if needed, a small
amount of dish soap can be added to the water) and dried using a clean, dry soft cloth. Cleaning of the
screen diffuser is to be done using only water and a lint free cloth.
DO NOT
use any abrasive household
cleaners as these products will damage the touchpad controls and the diffusing screen.
Electric Fireplace Insert 18/
23
