LAG SCREWS
CROSS MEMBER
3/8" X 3-1/2"
3/8" WASHER
2 X 4 X 58"
SWING LEG
LEVEL
STEP 29: SWING LEG CROSS MEMBER
1: POSITION THE 2 X 4 X 58" CROSS MEMBER AGAINST THE SWING BEAM LEGS.
2: LEVEL THE CROSS MEMBER, AND MARK THROUGH THE HOLES ONTO THE LEGS. DRILL AN
11/64" HOLE AT EACH MARK 2-1/2" DEEP.
3: FASTEN THE CROSS MEMBER TO THE LEGS WITH 3/8 X 3-1/2" LAG SCREWS AND 3/8"
WASHERS.
56
