STEP 9: ATTACHING PANEL SUPPORTS AND SAFETY BOARD
1: THE 2 X 4 X 36" PANEL SUPPORT BOARD (TOP BOARD) SHOULD HAVE THE HOLES OFFSET UP. USE 4"
HEX BOLTS AND 5/16" WASHERS TO SECURE THE BOARD TO THE CORNER POSTS.
2: THE 2 X 4 X 36" PANEL SUPPORT BOARD (BOTTOM BOARD) SHOULD HAVE THE HOLES OFFSET DOWN.
USE 4" HEX BOLTS AND 5/16" WASHERS TO SECURE THE BOARD TO THE CORNER POSTS.
3: PLACE THE TOP OF THE PANEL SUPPORT (USED AS SAFETY BOARD) 24" FROM THE BOTTOM OF THE 2 X
6 BOARD.
4: PREDRILL 9/64" HOLES 2-1/2" DEEP THROUGH THE HOLES IN THE SAFETY BOARD.
5: FASTEN THE SAFETY BOARD TO THE CORNER POSTS WITH 5/16" X 3-1/2" LAG SCREWS AND 5/16"
WASHERS.
2 X 4 X 36"
PANEL SUPPORT
PANEL SUPPORT
(OFFSET DOWN)
2 X 4 X 36"
(OFFSET UP)
5/16" WASHER
LAG SCREW
5/16" WASHER
5/16 X 3-1/2"
(SAFETY BOARD)
4" HEX BOLT
2 X 4 X 36"
PANEL SUPPORT
REAR OF PLAY SET
24"
36
